NEO-AES3-3 board

From NeoGeo Development Wiki
Revision as of 23:50, 25 May 2020 by Monk (talk | contribs) (added the information about the cases of power not being 9v and advised to have a look at the power page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Second (?) version of the AES main board.

Board map

Original picture by BIG BEAR.

Neo-aes3-3.jpg

Differences with the NEO-AES board

  • Uses the second generation chipset (NEO-B1, NEO-C1, LSPC2-A2).
  • Analog audio stuff is grouped in one spot.
  • Supposedly power input problem was patched to exclusively work with 9V power supplies however there have been cases reported where this didn't happen so make sure to have a look at the power requirements page for a better understanding.